The db Technologies VIO L210 loudspeaker is designed to provide a range aimed at larger sound reinforcement applications. This speaker delivers outstanding performances in terms of sound pressure, coverage coherence, intelligibility, and sound definition using a unique internal acoustic design and advanced sound processing.
The premium low-frequency transducers, positioned in a V form and sealed in a bass reflex wooden enclosure, have been custom designed to improve efficiency and to last in high stress conditions, providing an accurate transient response and an extended low-end reproduction. One single 3" voice coil compression driver (1.4" exit throat) accurately delivers high frequencies. A brand new waveguide contributes to create a cylindrical wave front, allowing a very precise high-frequency directivity control, much to the advantage of the system’s throw distance. Two massive aluminum phase plugs located in front of both woofers complete the acoustic enclosure and act as a prosecution of the constant directivity high-frequency waveguide. 26 diamond-shaped holes are located on each phase plug to help reduce any interference within the crossover zone while improving frequency and transient response.
The module features a highly efficient Class D Digipro G3 900 W RMS amplifier which is perfectly capable of achieving 135 dB SPL. Even at a long distance, a perfectly coherent coverage is granted thanks to advanced sound processing with FIR filters. The pre-amp module is also equipped with a digital optical isolation which avoids audio coupling, preventing any noise created by potential differences.
The VIO L210 comes with a built-in 3-point rigging system allowing a smooth and fast set up of the system. The 2 front links easily connect the modules from every angle. The back central rigging strand is equipped with a hook type link to set the relative splay angles determined via the prediction software dBTechnologies Composer. While lifting up the array, the rigging strand will automatically block the systems at the preset angles. This speaker comes in a white housing.
 
dbTechnologies VIO L210 Features:
2-way active line array system
Network ready with an integrated RDNET port
Newly designed wooden enclosure coated with polyurea
Smooth configuration and set up
Exclusively designed waveguide
Aluminum phase plugs
Advanced DSP with fir filters
Lightweight neodymium magnets
On-board double rotary EQ control system
 
dbTechnologies VIO L210 Specifications:
Technical Data
Speaker Type: 2-way Active Line Array Module
Acoustical data
Usable Bandwidth [- 6 dB]: 67-20,000 Hz
Frequency Response [+/- 3dB]: 78-18,100 Hz
Max SPL: 135 dB
HF: 1x1.4"
Voice Coil HF: 3"
Type HF: Neodymium, Titanium Diaphragm
LF: 2x10"
Voice Coil LF: 2.5"
Type LF: Neodymium Aluminum Phase Plug
Horizontal Directivity: 100°
Vertical Directivity: depends on array size and configuration
Amplifier
Amp Technology: Digipro G3
Amp Class: Class-D
Power RMS: 900 W
Peak Power: 1800 W
Cooling: Convection
Power Supply: 900 W SMPS with Auto-range PSU
Processor
Controller: DSP 56 bit
AD/DA Converter: 24 bit/48 KHz
Limiter: Dual Active Multiband Peak, RMS, Thermal
Processing (filters): FIR Linear Phase
Crossover Frequency LF-HF: 950 Hz
Slope LF-HF: 24 dB/Octave
Input
Signal Input: 1xXLR fem, Bal.
Signal Output: 1xXLR male, Bal.
Power Socket:
1xPowerCon TRUE1 IN
1xPowerCon TRUE1 Out
Controls:
1xSpeakers Coupling (7 presets)
1x HF Compensation (8 presets)
1XInput Attenuation Rotary Switch
Network: RDNet remote control RJ45 connector IN/OUT
Mechanics
Housing:
Multiplex Plywood
Polyurea painted
Housing Design: Trapezoidal 10°
Handles: 2x side
Rain Cover: Included
Rigging Points: Integrated rigging hardware
Width: 720 mm (28.35 in)
Height: 320 mm (12.6 in)
Depth: 520 mm (20.47 in)
Weight: 28.6 Kg (63.00 lbs)
Color: Black