VIO L212
3-WAY ACTIVE LINE ARRAY SYSTEM
3200W RMS DIGIPRO G4 AMP TECHNOLOGY
FULL RANGE SMPS WITH PFC
HORN-LOADED MIDRANGE FOR IMPROVED ACOUSTIC EFFICIENCY AND COVERAGE ACCURACY
EXCLUSIVELY DESIGNED WAVEGUIDE FOR MAXIMUM HF DIRECTIVITY CONTROL
ADVANCED DSP FEATURING LINEAR PHASE FIR FILTERS
ACOUSTIC COMPATIBILITY WITH VIO L210 USED AS DOWN-FILL
MODULAR SLOT FOR NETWORK AND DIGITAL AUDIO EXPANSION CARDS (RDNET CARD INSTALLED)
NFC™ + FRONT LED IDENTIFICATION SYSTEM
SYSTEM TEST FOR QUICK TRANSDUCERS DIAGNOSTICS
IPOS INTELLIGENT POWER-ON SEQUENCE
RUBBER MAGNETIC RAINCOVER INCLUDED
ONLY 54.4 KG PER MODULE
BUILT-IN INCLINOMETER
 
PREMIUM COMPONENTS SEALED IN A UNIQUE ACOUSTIC DESIGN
VIO L212 is a three-way active line array module exclusively equipped with neodymium components: 2×12″ woofers (3” v.c.) placed to the outsides in a dipolar arrangement provide an accurate transient response and an extended and controlled low-end reproduction; The mid-range section is mounted in the centre of the cabinet in a horn-loaded configuration which dramatically contributes to the system’s acoustic efficiency.  Midrange frequencies are delivered by 4x 6.5” woofers  (voice coil 2”), while the 2×1,4” neodymium compression drivers (voice coil 3”) have been mounted to a waveguide which contributes to create a cylindrical wavefront, much to the advantage of the system’s intelligibility and throw capabilities. 
 
CLASS D AMPLIFIER WITH FULL-RANGE POWER SUPPLY AND PFC 
Each VIO L212 acoustic engine is driven by 2 Digipro G4® Class-D 1600W amplifiers, providing each system with a total of 3200W RMS.
The switched mode power supply is equipped with PFC (Power Factor Corrector) which greatly improves the efficiency of the system. Performances of the amplifier are very stable and consistent, regardless of the quality of the mains and fluctuations.
This also grants a worldwide compatibility of the power supply (from 90V to 265V 50/60Hz) and limits power consumption.
Furthermore, the power supply is 380V resistant, so the final amplifiers will be switched off in case of an undesired strike of 380V current, saving them from any damage.
 
Technical Data
Speaker Type: 3-Way Active Line Array Module
Acoustical data
Usable Bandwidth [- 6 dB]: 55 – 18.600 Hz
Max SPL: One Unit: 142 dB
HF: 2 x 1.4”, 3” v.c. – Neodymium
MF: 4 x 6.5” , 2” v.c. – Neodymium
LF: 2 x 12”, 3” v.c. – Neodymium
Horizontal Directivity: 90°
Vertical Directivity: depends on array size and configuration
Amplifier
Amplifier: 3200 W RMS [2x 1600 W RMS Class-D Digipro® G4] 
Cooling: Convection, Internal fan
Power Supply: Full-range SMPS with PFC (100V~-240V~, 50-60Hz)
Processor
Controller: DSP 32 bit
AD/DA Converter: 24 bit/96 kHz
Limiter: Dual Active Multiband Peak, RMS, Thermal
Processing (filters): FIR Linear Phase
Input
Signal Input: 1x XLR female, balanced
Signal Output: 1x XLR male, balanced
Expansion Card:
RDNet Card (1x RJ45 IN 1x RJ45 Link)
Dante Card [Optional]
Power Socket:
1x PowerCON TRUE1 In
1x PowerCON TRUE1 Out
Controls:
1 x Speaker Coupling (7 presets)
1 x High pass filter Rotary Encoder (8 presets)
1 x HF Compensation (8 presets)
1 x System Test Button
Special Features:
NFCTM and Frontal LED Identification System
380V Resistant SMPS
IPOS Intelligent Power-On Sequence
Opto-isolated floating pre-amp
System Test (transducers diagnostics)
Inclinometer
Mechanics
Housing: Multiplex plywood – Polyurea painting
Housing Design: Trapezoidal
Handles: 4 x handles (2 on each side)
Rain Cover: Included [Rubber magnetic]
Rigging Points: 3 points rigging hardware
Width: 1100 mm (43.31 in)
Height: 380 mm (14.96 in)
Depth: 450 mm (17.72 in)
Weight: 54.4 Kg (119.93 lbs)
Note: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.