Features
Core Technology
- Bus-powered USB 2.0/iPad audio interface
- 24-bit resolution; 44.1, 48, 88.2, and 96 kHz sampling rate
Inputs and Outputs
- 1 microphone input with low-noise, high-headroom, Class A mic preamplifier and +48V phantom power
- 1 instrument input
- 2 balanced ¼” TRS main line-level outputs
- Stereo headphone output with independent level control
Controls
- Zero-latency monitoring via internal analog mixer (fixed 50/50 mix via Direct button)
- Large main volume knob
- Signal present and clipping LEDs
Integrated Software
- Studio One® Artist DAW software (Mac/Windows) and 6+ GB of third-party resources
- Transfer files wirelessly from Capture for iPad to Studio One
- Compatible with almost all recording software for Mac®, Windows®, and iPad®
- Studio Magic Plug-in Suite included
Construction and Security
- Kensington lock hole
- Metal chassis
Computer system requirements:
Below are the minimum computer-system requirements for the AudioBox iOne and AudioBox iTwo:
macOS®
- macOS® 10.13 or higher (64-bit only)
- Intel® Core™ i3 or better
- Minimum 4GB RAM / Recommended 8GB or more
Windows®
- Windows® 10 (64-bit only)
- Intel® Core™ i3/AMD A10 processor or better
- Minimum 4GB RAM / Recommended 8GB or more
Mac and Windows Systems
- USB 2.0 port
- Internet connection
- Internal or external 7200 RPM storage drive highly recommended
- 30 GB hard disk space
- Monitor with 1366×768 resolution
Apple iPad
- iPad® Pro, iPad Air, iPad mini with Retina display, iPad (4th generation)
- iOS® 9.0.3 or higher
The minimum system requirements may differ for DAWs other than Studio One. Please check the requirements for your DAW of choice with its manufacturer.
Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio or MIDI signals. Monitor resolution for both PC and Macintosh should be no lower than 1024×768 pixels.
VST is a registered trademark of Steinberg Media Technologies GmbH
ASIO is a trademark and software of Steinberg Media Technologies GmbH
Technical Specifications
Microphone Preamp
Type XLR female, balanced Frequency Response (±3.0 dB) 10 Hz to 40 kHz Input Impedance (Balanced) 1,200Ω THD+N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain) < 0.008% S/N Ratio (Unity Gain, Ref. = +4 dBu, 20 Hz to 22 kHz) > 95 dB Common Mode Rejection Ratio (1 kHz, 52 dB Gain) > 65 dB Gain Control Range (± 1 dB) 0 dB to 52 dB Max Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) +10 dBu Phantom Power (±2 VDC) +48 VDC
Line Input
Type — Input Impedance —
Instrument Input
Type ¼” TS female, unbalanced Input Impedance 1 MΩ
Line Outputs
Type ¼” TRS female, balanced Output Impedance 51Ω
Headphone Output
Type ¼” TRS active stereo Maximum Output 60 mW/ch. @ 60Ω Load Frequency Response (±1.0 dB) 20 Hz – 30 kHz Output Impedance 10Ω
MIDI I/O
Type —
Digital Audio
ADC Dynamic Range (A-wtd, 48 kHz Sample Rate) 105 dB DAC Dynamic Range (A-wtd, 48 kHz Sample Rate) 105 dB Bit Depth 24 Reference Level for 0 dBFS +10 dBu Internal Sample Frequency Selections (kHz) 44.1, 48, 88.2, 96 Power USB bus-powered
Physical
Height 1.71” (43.5 mm) Depth 5.31″ (135 mm) Width 5.91” (150 mm) Weight 1.35 lbs (0.62 kg)