Features
Core Technology
Bus-powered USB 2.0/iPad audio interface
24-bit resolution; 44.1, 48, 88.2, and 96 kHz sampling rate
Inputs and Outputs
2 microphone inputs with low-noise, high-headroom, Class A mic preamplifiers and +48V phantom power
2 switchable line/instrument inputs
2 balanced ¼” TRS main line-level outputs
1×1 MIDI In/Out
Stereo headphone output with independent level control
Controls
Zero-latency monitoring via internal analog mixer (variable mix via Mix knob)
Large main volume knob
Signal present and clipping LEDs
Integrated Software
Studio One® Artist DAW software (Mac/Windows) and 6+ GB of third-party resources
Transfer files wirelessly from Capture for iPad to Studio One
Compatible with almost all recording software for Mac®, Windows®, and iPad®
Studio Magic Plug-in Suite included
Construction and Security
Kensington lock hole
Metal chassis
 
Computer system requirements:
Below are the minimum computer-system requirements for the AudioBox iTwo:
macOS®
macOS® 10.13 or higher (64-bit only)
Intel® Core™ i3 or better
Minimum 4GB RAM / Recommended 8GB or more
Windows®
Windows® 10 (64-bit only)
Intel® Core™ i3/AMD A10 processor or better
Minimum 4GB RAM / Recommended 8GB or more
Mac and Windows Systems
USB 2.0 port
Internet connection
Internal or external 7200 RPM storage drive highly recommended
30 GB hard disk space
Monitor with 1366×768 resolution
Apple iPad
iPad® Pro, iPad Air, iPad mini with Retina display, iPad (4th generation)
iOS® 9.0.3 or higher
 
The minimum system requirements may differ for DAWs other than Studio One. Please check the requirements for your DAW of choice with its manufacturer.
Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio or MIDI signals. Monitor resolution for both PC and Macintosh should be no lower than 1024×768 pixels.
 
VST is a registered trademark of Steinberg Media Technologies GmbH
ASIO is a trademark and software of Steinberg Media Technologies GmbH
 
Technical Specifications
Mi crophone Preamp
 
Type
XLR female, balanced
Frequency Response (±3.0 dB)
20 Hz to 20 kHz
Input Impedance (Balanced)
1,200Ω
THD+N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain)
< 0.008%
S/N Ratio (Unity Gain, Ref. = +4 dBu, 20 Hz to 22 kHz)
> 95 dB
Common Mode Rejection Ratio (1 kHz, 52 dB Gain)
—
Gain Control Range (± 1 dB)
0 dB to 52 dB
Max Input Level (Unity Gain, 1 kHz @ 0.5% THD+N)
+10 dBu
Phantom Power (±2 VDC)
+48 VDC
Line Input
 
Type
¼” TRS female, balanced
Input Impedance
10 kΩ
Instrument Input
 
Type
¼” TS female, unbalanced
Input Impedance
1 MΩ
Line Outputs
 
Type
¼” TRS female, balanced
Output Impedance
51Ω
Headphone Output
 
Type
¼” TRS active stereo
Maximum Output
60 mW/ch. @ 60Ω Load
Frequency Response (±1.0 dB)
20 Hz – 30 kHz
MIDI I/O
 
Type
Dual 5-pin female DIN
Digital Audio
 
ADC Dynamic Range (A-wtd, 48 kHz Sample Rate)
105 dB
DAC Dynamic Range (A-wtd, 48 kHz Sample Rate)
105 dB
Bit Depth
24
Reference Level for 0 dBFS
+10 dBu
Internal Sample Frequency Selections (kHz)
44.1, 48, 88.2, 96
Power
USB bus-powered
Physical
 
Height
1.71” (43.5 mm)
Depth
5.31″ (135 mm)
Width
7.56” (192 mm)
Weight
1.35 lbs (0.62 kg)